Trang chủ >
- Sản phẩm
- >
- Kiểm Soát Vào Ra
- >
- Kiểm soát vào/ra JANTEK
- >
- Bộ đọc thẻ,vân tay
- >
- Kiểm Soát Vào Ra
- >
- Kiểm soát vào/ra JANTEK
- >
- Bộ đọc thẻ,vân tay
- >
- FP-200DE Proximity with Fingerprint Access Control System


- Mã:
- Hãng sản xuất:
Overview
Standalone or PC on line with JAS software
Frequency is 125KHZ
With backlit keypad and LCD
Programmable door delay close time from 0~250 seconds, when door unlock over delay time setting, the alarm signal will output
Support 1000 users for FP-200D and 4,000 users for FP-200E (Each user can enroll two templates)
Feature
- Standalone or PC on line with JAS software
- Frequency is 125KHZ
- With backlit keypad and LCD
- Programmable door delay close time from 0~250 seconds, when door unlock over delay time setting, the alarm signal will output
- Support 1000 users for FP-200D and 4,000 users for FP-200E (Each user can enroll two templates)
- Can be used by 1.8mm、0.76mm EM card or Key tag
- Reading range from 14~20cm (under normal environment)
- Built-in RS232 & RS485 interface
- Can save 10,000 door access history record
- Reader ID can be setting through Dip switch
- Built-in Watch Dog, the system never hang
- Built-in tamper switch detects when case is forced open or destroy, the alarm signal will output (A. B. point)
- Data is protected even after power failure
- Door open mode: Card + Fingerprint, PIN + Fingerprint, Card only mode
- User selectable Card door open mode when fingerprint is hard verification
- Fingerprint verification in less than 1 second
- Intranet network with two options: 1.Built-in TCP/IP 2.External TCP/IP converter
- Built-in Mifare / HID module (Option device)
Sepecification
LCD |
2 x 16 Characters |
Keypad |
4 x 4, 16 Keys backlit keys |
Power requirement |
DC 12V,1Amp |
Environment |
Operating Temperature: 32℉~122℉(0℃~50℃) |
Humidity |
20%~90% RH |
Dimensions |
185(L) x 184(W) x 48(H) mm |
Relay |
3 relay contact (Max. DC 12V 1Amp) |
FAR |
< 1/100,000 |
FRR |
< 1/1,000 |

